Idiomas disponibles
Idiomas disponibles
D
Check the functioning
Note.
Thanks to the pre-set parameters, the grinder is immediately ready
to grind your coffee.
D.1 Position the filterholder, with the correct filter inserted, on the fork (8) to
"hook" it with the pin (11).
Note.
In case you can't insert your filterholder on the fork (8), you can
change the position of the upper filterholder pin (11), loosening it with a screw-
driver to lift or lower it. Once you found the optimal position, screw the pin back
(11) to grant a secure support for your filterholder.
D.2 To grind 1 dose, press once the grinding switch (7) (PUSH), the LCC (9)
display will show in sequence the image referring to the dose per 1 coffee, the
grinding time programmed and the image of the grinder in action.
D.3 To grind 2 doses, press twice the grinding switch (7) (PUSH). The 2 impuls-
es have to be within 2 seconds. The LCC (9) display will show in sequence the
image referring to the dose per 2 coffees, the grinding time programmed and the
image of the grinder in action.
E
Grind the coffee
Note.
The grinder has been equipped with 64 mm flat burrs, that grant a
uniform and professional grinding.
E.1 Check that the hopper is filled with beans and that it has the cover (1).
E.2 Turn the grinder on by pressing the on/off switch (5). The standby led light
(6) will blink for a short time, the LCC display (9) will show the grinder icon con-
firming the turning on.
E.3 Position the filterholder, with the correct filter inserted, on the fork (8) to
"hook" it with the pin (11).
E.4 To grind 1 dose, press once the grinding switch (7) (PUSH), the LCC (9)
display will show in sequence the image referring to the dose per 1 coffee, the
grinding time programmed and the image of the grinder in action.
The grinder grinds the dose according to the set time. Wait until the grinding is
over, the message "OK" and then the grinder icon will appear on the LCC (9)
display. Remove the filterholder from the fork (8).
E.5 To grind 2 doses, press twice the grinding switch (7) (PUSH). The 2 presses
have to be within 2 seconds, the LCC (9) display will show in sequence the im-
English
EN
11
