QJMOTOR SRK 400 Manual Del Usuario página 9

Safety Instructions for Motorcycle
Code of safe riding
1. The motorcycle must be inspected before driv-
ing, to avoid accidents and damage to parts.
2. Riders must pass the examination organized by
the traffic management department and obtain a
rider's license consistent with the permitted
motorcycle before riding. It is not allowed to lend
the motorcycle to anyone without a rider/s
license.
3. To avoid injury from other motor vehicles, the
rider must try to attract others' attention. To this
end, please comply with the following require-
ments:
– Wear visible tight clothes;
– Do not get too close to other motor vehicles.
4. Strictly abide by the traffic rules and do not allow
to cut in.
5. Must not exceed the maximum speed limit of the
road section, because the accidents are mostly
caused by speeding.
6. Turn on the turn signal in advance when turning
or changing lanes to attract the others' attention.
7. Drive carefully while riding through the intersec-
tions, entrances and exits of parking lot and
express lanes.
8. It is illegal to modify the motorcycle or disassem-
ble the original car parts at will, which will not
guarantee the safety of driving, and will affect
the motorcycle warranty.
9. The configured accessories must not affect the
riding safety and operating performance of the
motorcycle, especially the overload of electrical
system, may easily cause danger.
Protective clothing
1. In order to ensure personal safety, the rider must
wear a safety helmet, protective glasses, as well
as riding boots, gloves and protective clothing.
Passengers also need to wear safety helmets
and grasp the handrail.
2. During riding, the exhaust system becomes hot,
and it remains hot for a while after the engine
stops working. Do not touch the exhaust system
during the hot periods.
3. Do not wear a wide overcoat that may be caught
by the control lever, pedals or wheels while
riding
4