QJMOTOR SRK 400 Manual Del Usuario página 19

Right handle switch
1 Start/stop switch
Toggle the switch to " " posi-
tion: the circuit is connected,
and the engine can be started.
Toggle the switch to " " posi-
tion: the circuit is discon-
nected, and the engine cannot
be started.
2 Hazard warning lamps switch
After pressing the hazard light switch, the front, and
rear turn signal lights will flash at the same time to
warn others of the position of your vehicle.
3 Electric start button
Press the electric start button, the electric motor
runs and the engine is started.
4 Accelerator control grip
The accelerator control grip is used to control the
engine speed. To accelerate, turn the grip towards
you; to decelerate, release it.
5 Front brake handle
For front braking, hold the brake handle of right grip
slowly.
6 Front brake handle opening adjuster
According to the needs of oper-
ating comfort, the position of
front brake handle can be
adjusted by adjusting the posi-
tion of ring nut adjusting knob,
with four optional positions for adjustment. The desired
position can be adjusted after moving the front brake
handle forward horizontally, and then rotating the ring
nut adjuster to make it align with the arrow A. Among
them, the front brake handle is the farthest from accel-
erator control grip at position 1, and front brake handle
is the closest to accelerator control grip at position 4.
Refueling fuel tank
When the fuel indicator flashes on the meter; the
fuel should be added.
When refueling, first open the
dust cover of fuel tank cap (A),
then insert the key and rotate
clockwise, and open the fuel
tank cover by pulling together
with the key. After refueling, to
close the fuel tank cover; please align the fuel tank
cover guide pin, and then press down, you can close
the fuel tank cover; remove the key after hearing lock
14