QJMOTOR SRK 400 Manual Del Usuario página 18

Notice
To prevent theft, please lock the steering mecha-
nism and remove the key when parking. After lock-
ing, turn the handle bar slightly to confirm whether
it is locked. Please do not park in places that may
obstruct traffic.
Left handle switch
1 Clutch handle
When starting the engine or
shifting gears, hold the clutch
handle bar to cut off the driv-
ing action on rear wheels.
2 Horn button
Press the horn button and the horn will sound.
3 High-beam and low-beam switch of headlight
" " position: the high beam of headlight is on, and
meanwhile the high beam indicator on the meter
panel is also on; " " position: the low beam of
headlight is on.
When riding in the urban area or in case of vehicle
coming from the front, low beam lights should be
used to affect the other driver's line of sight
4 Turn signal light switch
After pressing the turn signal light switch "
" ", the signal light for turning to the left or right will
flash. At the same time, the green turn indicator on
the meter panel will flash accordingly. When releas-
ing the turn signal, turn the turn signal switch to the
middle or press the switch down.
Warning
To change lanes or make a turn, turn on the turn sig-
nal light in advance and confirm that no vehicles are
passing behind. After switching lanes or turning, turn
off the turn signal light in time to avoid affecting the
normal driving of other vehicles and accidents.
5 Overtaking light switch
When meeting or overtaking with a vehicle, press
this button continuously, the headlight high beam
light will flash continuously to warn the vehicle
ahead.
6 Danger warning light button
After pressing the harzard warning light button, the
front rear and turn signal lights will flash at the same
time to warn you of the danger.
13
" or