Ammann APR 4920 Traducción De Instrucciones Originales página 36

3. Operation
3.5.3 Stopping the engine
MIN
1
1 – 2 min.
•
Set the engine speed lever (1) to idle (MIN).
•
Allow the engine to run for 1-2 minutes.
STOP
•
Set the engine speed lever (1) to «STOP».
Additionally by electrostart:
6
5
•
The charge indicator (4) and the oil pressure indicator (6)
lights up and a horn (5) sounds.
•
Turn the ignition key (3) to «0». The horn will sound if the igni-
tion key is not returned to the «0» position; a risk of total bat-
tery discharge exists.
•
Remove the key.
At the end of a working day or a break protect the
key from unauthorised access.
Danger
B5399008.cdr
1
B5399010.cdr
0
I
3
4
B5399011.cdr
3.6 Operation
MIN
STOP
MAX
2
•
Set the engine speed lever (2) to full load (MAX).
Operate the machine only at full throttle and turn
the machine always in idle position during short
rest periods. Otherwise Danger of clutch damages
Attention
or slipping of centrifugal clutch.
B4899018
I
•
The proper position for the operator is behind the machine.
•
Control and steer the machine using the tow bar grip (1).
•
Set the travel direction and speed with the travel lever (1).
For compaction of paving stones, it is recommended to
use Vulkollan plates and protective brackets (special
accessories) to prevent damages to the compaction
Important
material and to the machine.
If the machine is used without protective bracket, the
threaded fastenings in the base plate must be sealed
with the supplied screw plugs .
33
1
I
0
II
B5399002.cdr
0 II
2 1