Ammann APR 4920 Traducción De Instrucciones Originales página 31

max. grade ability
Drive
Control (forward/reverse)
4. Operating speed
5. Vibration
Centrifugal power
Vibration frequency
6. Superficial power
Base unit
w. mount. brackets 75 mm
w. mount. brackets 150 mm
7. Special equipment
Mounting brackets 75 mm
Mounting brackets 150 mm
Vulkollan plate
Electrical starter
8. Noise and vibration data
The following noise and vibration data according to EC Machinery Directive in the version (2006/42/EC), was determined, taking into account
the following standards and directives. In operational use, values can deviate depending on the prevailing conditions.
2)
5.1 Noise data
The noise data specified in Appendix 1, sub-clause 1.7.4.u of the EC Machinery Directive is for:
Sound pressure level at the workplace L
Measured sound power level L
Guaranteed sound power level L
The noise values were determined, taking into account the following directives and standards:
Directive 2000/14/EC / EN ISO 3744 / EN 500-4
5.2 Vibration data
Hand/arm vibration values according to Appendix 1, sub-clause 3.6.3.1 of the EC Machiner y Directive:
Total vibration value of the acceleration a
Uncertainty K
The acceleration value was determined, taking into account the following directives and standards:
EN 500-4 / DIN EN ISO 5349
2)
As the permissible rating sound level of 85 dB (A) can be exceeded by this machine, operators must wear hearing protectors.
PA
WA,m
WA,g
hv
APR 4920 (Ha)
30 %
via centrifugal clutch and V-belt
hydraulic
0 - 31 m/min
49 kN
65 Hz
2
up to 835 m /h
2
up to 1115 m /h
2
up to 1395 m /h
104,7 dB
106 dB
108 dB
2
6.9 m/s
1.0 m/s
28
2. Technical data
APR 5920 (Ha)
0 - 33 m/min
59 kN
2
up to 890 m
up to 1180 m
up to 1485 m
O
O
O
O
O = Option / S = Serial / — = Not available
2
6.2 m/s
2
/h
2
/h
2
/h