Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
etc.), raw and cooked meats (boned
with tendons removed and chopped
into chunks), raw or cooked fish. Do
not chop things that are too hard
(rice, sugar) or which require very
fine chopping (wheat, coffee).
Grate/slice (fig. 7):
- Slip the grating or slicing disc (A, G,
H) into the blade holder disc (E9),
place the knife holder (E8) along the
axis of the bowl (E1), place the blade
holder disc (E9) on the knife holder
(E8), place the reducer (E6) on the
lid (E3).
- Place the lid (E3) on the bowl and
lock it.
- Set the motor unit (A1) in position
on the lid.
- Turn on.
- Introduce the food through the
feeder tube and push them using the
pusher (E2), never with your fingers
or any other utensil.
- To dismantle, press the ejection
button (E7) to remove the motor unit
(A1) from the reducer (E6) before
removing the lid.
- Unlock (E7) the lid (E3) to access
the food.
- Carefully remove the blade holder
disc (E9) and the knife holder (E8)
before removing the food. Then
carefully remove the blades (A, G, H)
from the blade holder disc (E9).
*Blade A (Grater): carrots, cheese,
celery, etc.
Prepare a maximum of 1000 g of
food at a time (no meat or cold meat
products).
*Blade G (Reibeküchen): Potatoes,
parmesan.
*Blade H (Slice): sliced potatoes,
carrots, cucumbers, etc. maximum
800 g.
Cleaning
- Unplug the appliance, remove the
accessories.
- The reducer (E6) and the whisk
reducer (C1) are not dishwasher
proof; you can clean them with a
damp sponge.
- All the other accessories are dis-
hwasher proof. Place the blender
shaft (B1) with the blade facing
upwards in the dishwasher.
- Do not use abrasive sponges or
objects that contain metal parts.
- Never submerge the motor unit (A1)
into water. Wipe it down with a dry or
very slightly damp cloth.
- In the event that your accessories
are coloured by the food (carrots,
oranges, etc.), rub them with a cloth
with sunflower oil and then clean
them as usual.
- Handle the knives E4 and F3 or bla-
des A, G, H with extreme care; they
are very sharp.
What do I do if my appliance
doesn't work?
Start by checking the power cord and
plug, then:
- Check that the lid (E3) to your
multifunction bowl is properly locked.
If it is not properly locked your engine
unit (A1) will not be able to make your
multifunction bowl work because the
reducer drive system (E6) will not
operate.
- Check that the appliance's safety
system has not been activated. If it
has, leave the appliance to cool down
for around 30 minutes.
- If the lid does not lock properly, press
the unlocking button (E7) on the
reducer (E6) before locking it again.
Refer to the «Usage» paragraph for
assembly instructions.
You have carefully followed all these
instructions, and yet your appliance
still does not work? In this case,
contact your dealer or an approved
Moulinex Centre (see the list in the
«Moulinex Service» booklet).
9
