Safety Devices On The Product; Personal Protective Equipment - Husqvarna TS 300 E Manual Del Usuario

• Make sure that the product is assembled correctly.
Assembly on page 9 .
Refer to
• Do not use the product if there are signs of damage.
• Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
• Always use approved accessories. Speak to your
dealer for more information.
• Make sure that the blade is correct to use for the
current material. Speak to your dealer for more
information.
• Do not cut in asbestos materials.
• Do not put tools or other objects on the product.
• Make sure that the daily maintenance is done before
you start the motor. Refer to
13 .
• Make sure that you are in a safe and stable position
during operation.
• Do not stand on the product.
• Do not overreach. Keep distance between your face
and the cutting blade. Use 2 hands on the work
piece and make sure that your hands are on a safe
distance from the cutting blade.
• To use the plunge function 1 hand is put on the
cutting handle to adjust the cutting blade.
• Do not overload the product, it can cause damage to
the product.
• Make sure that the depth set lock is loose and to lift
the blade before the blade is angled.
• Make sure that the direction that the blade rotates
is correct. The arrow on the blade guard shows the
correct direction.
• Make sure to feed the work piece along the direction
of rotation of the blade.
• Do not grind with the side of the blade. The blade
can break and this can cause vast damage. Use only
the cutting section of the blade.
• Keep the motor on until the fan comes to a complete
stop.

Personal protective equipment

WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electrical shock, fire and/or serious injury.
2282 - 002 - 07.02.2024
Maintenance on page
Read all safety warnings
• Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment.
• Use protective gloves.
• Use boots with steel toe-cap and non-slip sole.
• Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
• Do not use jewelry or other items that can get caught
in moving parts. Put your hair up safely above
shoulder level.
• Use an approved respiratory protection. The product
causes dust that is bad for your health.
• Always use approved hearing protection while
operate the product.
• Use approved eye protection with side protection.
• Make sure that you have a first aid kit near.
• Sparks can occur when you operate the product.
Make sure that you have a fire extinguisher near.
• Regularly do a check of the condition of the personal
protective equipment.

Safety devices on the product

WARNING:
instructions that follow before you use the
product.
• Do not use a product with safety devices that are
damaged or do not operate correctly.
• Do a check of the safety devices regularly. If the
safety devices are damaged or do not operate
correctly, speak to your Husqvarna approved service
agent.
• Do not change the safety devices.
• Do not use the product if protective plates, protective
covers, safety switches or other protective devices
are damaged or not attached.
Blade guard
The blade guard keeps dust away from the operator and
prevents injury if the cutting blade breaks.
Read the warning
7