Idiomas disponibles
Idiomas disponibles
EN
PRODUCT OVERVIEW
The electronic battery tester is a portable device that is easy to use starter bat-
tery and battery charging system tester with rated voltage of 12 V. The device is
always ready for operation because the power supply is taken directly from the
tested battery. The correct, reliable, and safe operation of the device depends on
its proper use, therefore:
Read the entire instructions manual before the fi rst use of the product and
keep it for future reference.
The supplier shall not be held liable for any damage resulting from failure to ob-
serve the safety regulations and recommendations specifi ed in this instructions
manual. Use of the product for purposes other than those for which it was intend-
ed shall cause the loss of the user's rights to the guarantee and under warranty.
TECHNICAL DATA
Types of batteries that can be tested:
Regular fl ooded lead-acid batteries
EFB (Enhanced Flooded Battery) – lead-acid batteries with increased capacity
AGM (Absorbed Glass Mat) – a type of gel battery, where the electrolyte is lo-
cated in high porosity fi breglass mats; the mats are located between the plates.
Gel - gel batteries
CCA test range:
CCA 100-2000
BCI 100-2000
CA 100-2000
MCA 100-2000
JIS 26A17-245H52
DIN 100-1400
IEC 100-1400
EN 100-2000
SAE 100-2000
GB 30-220Ah
Battery rated voltage 12 V DC
Battery voltage measurement range: 8-30 VDC
Operation conditions T: -10°C – 60°C Rh <80%
Storage conditions T: -20°C – 70°C Rh <80%
Dimensions: (L) 122 x (W) 78 x (H) 22 mm
SAFETY INSTRUCTIONS
Keep your work environment safe. The workplace should be well lit. Make sure
you have enough room to move freely in the work area. Keep your work environ-
ment free from obstacles, grease, oil, rubbish and other waste.
12
M A N U A L O R I G I N A L
