Section SIX: CARE AND MAINTENANCE
Self-Cleaning the Oven
To Set Self-Clean for the Large Main Self-Cleaning Oven
.
2.
Select
CLEAN
using the Selector
switch.
Set Oven Control
Knob to CLEAN.
•
Cooling
Blower turns on.
•
OVEN ON light and HEATING
light turn on.
•
Lock
light turns on.
•
Temperatu
re indicator
rotates to CLEAN
afterfive
minutes.
•
The door closing process
takes approximately
60 seconds
to complete,
at which
time the door
becomes
locked.
Check
to make certain
the door
is locked.
PD304
OVEN CONTROL KNOBS
•
OVEN
•
HEATING
•
CLEANING
At the End of the Clean Cycle
The Clean cycle takes 4 to 5 hours to complete.
The blower
and the
OVEN ON light and the CLEAN
light turn off when the cycle is finished.
Do not turn the selector
switch
or the oven control
knob to the OFF
position
until the LOCK
light goes off.
1.
Select OFF using the Selector
Switch.
•
The door latch will open automatically
when the oven is
below 500°F and the automatic
Door Lock completes
its 60
second
cycle to the OPEN
position.
•
The cooling
blower turns off when
the oven temperature
drops to 325 ° .
2.
Turn Oven Control
Knob to OFF position.
CAUTION
The interior
of the oven will
still be at baking
tempera-
tures when
the LOCK
light
turns off and the oven door
can be opened.
Cleaning
Hints
1.
The porcelain
enamel
finish
is acid resistant,
but not acid proof.
Acidic
foods,
such as citrus
juices,
tomatoes,
rhubarb,
vinegar,
alcohol or milk, should be wiped up and not allowed to bake onto the
porcelain
during the next use.
2.
Remove
the
oven
racks.
See
Racks,
on Range
Cleaning
Recommendations,
Page 41.
3.
The heating
elements
in the oven do not require
cleaning;
the
elements
burn themselves
clean
when
the oven
is in use. Both
elements
are permanently
connected.
It is not necessary
to clean
the broiler shield
above the broil element.
4.
The secondary
oven (PD48 rangeonly)
does nothave
have the Self-
Clean feature.
Use caution when cleaning
the secondary
oven. Use
hot sudsy water; rinse and dry thoroughly.
36