Thermador Professional PRO-GRAND PD304 Manual De Cuidado Y Uso página 22

Section Four: USING THE COOKTOP
Disassembly/Assembly of the Grill
CAUTION:
• Use extreme care when placing the grill
components
into the
grill
compartment.
Avoid contacting the ceramic igniter which
could break preventing operation of the
grill.
• The grill must be assembled as shown.
The drip tray heat shields must be in place,
and the burner must be properly positioned
relative to the gas supply. Incorrect
assembly of the grill may result in unsafe or
hazardous conditions during operation.
• The grill radiant must be in place for proper
operation of the grill.
• Do not leave the grill unattended while in
use.
Do not use charcoal briquettes or coals of
any kind.
Follow the steps below to disassemble the
components in the grill box.
A.
Remove the grill grate, stainless steel radiant and
burner from the grill box.
B. Remove the heat deflector from the slots on the
front panel of the grill box.
C. Remove the rectangular drip pan inside the grill
box as shown below.
Re-assembly
A. Replace the drip pan and heat deflector.
B. Insert the end of the burner into the slots at the
back of the grill box. Insert the tab on front of the
burner into slot in the heat deflector.
C. The stainless steel radiant lies on two (2) studs
on each end of the grill can.
D. Place the grill grate, with raised food containment
rail oriented towards the grill box rear.
Exploded Views and Side View of Grill
Grill
Grate
Drip Pan
Steel
U-shaped i
burner
Heat
Deflector
Grill Box
Burner placement in slots in back of grill
20