Maintenance Schedule; Maintenance And Servicing - TRAPP TR-600 Manual De Instrucciones

www.trapp.com.br
Maintenance is essential to extend the life of any
farming equipment, to improve performance
and provide greater safety. The operation times
indicated in this manual are to be used as a
reference for normal usage conditions. They
can vary according to the type of service,
environment, seasonal factors etc.

Maintenance schedule

Every 10 working hours
At the end of every working day, clean the
 
machine so that its parts are always in good
working conditions.
Lubricate cardan crosshead.
 
Check for hydraulic oil leak and for damaged
 
parts.
Make sure blades are in good condition,
 
sharp and properly secured.
Every 25 working hours
Lubricate rotor bearings through grease
 
fittings.
Lubricate transmission shaft bearings through
 
grease fittings.
Every 50 working hours
Check whether belts are properly stretched.
 
Check whether all screws and nuts are  
properly tightened.
Maintenance

Maintenance and servicing

Before servicing the machine, stop the motor,
disconnect from TDP, use parking brakes and
place equipment horizontally on the ground.
Before injecting lubricant through grease
fittings, clean them to prevent dust and weird
objects from getting mixed with the grease,
decreasing the lubrication effect.
Regularly lubricate equipment for efficiency,
to extend life and improve performance. Inject
grease through grease fittings with a pump in the
following points:
A, B (Fig.1) transmission shaft bearing.
 
C, D (Fig. 2-3) steering wheel shaft bearing.
 
E (Fig. 4) output device base.
 
B
A
Fig. 1
85
20