Maintenance Instructions; General Maintenance - TRAPP TRF 50 Manual De Instrucciones

Shredder models TRF 60, TRF 70, TRF 80 and
TRF 80M are equipped with a 127/220 V voltage
selector switch.
Note:
if necessary, the motor protection cover (as
shown in the figure) may be removed for cleaning
(dust) originated by the grain grinding process.
To attach rubber cushions, proceed as per
 
illustration.
Maintenance is critical to prolong the life and performance of any agricultural implement. Good mainte-
nance of the machine ensures good performance, long life of your equipment and increase work safety.
The operation times reported in this manual are for informational purposes only and are referenced under
normal use and therefore may vary by type of service, environment, seasonal factors, etc.

General maintenance

For every 10 hours of work
At the end of each working day, it is important to
 
clean the machine so that its parts are always in
working condition.
Make an overall inspection for loose or damaged
 
parts.
Make sure the blades are in good condition, sharp
 
and perfectly still.
60
Voltage Selector Switch
Rubber Cushions

Maintenance Instructions

For every 50 hours of work
Make sure the belts are properly tensioned.
 
Make sure all nuts and bolts are tight.
 
www.trapp.com.br