TRAPP TR-600 Manual De Instrucciones página 70

Attention!
Read all instructions herein before operating
the equipment. Always observe and follow
safety instructions to prevent accidents and/
or injuries.
Residues Shredders models TR-600/600E/600G
and 600T are designed to cut trimmed wood
residues, branches, chips, bushes, wood of
diameter up to 10 cm, package residues and
other wooden structures free from nails, wire or
other metals. Any other use poses a risk to the
integrity of the machine and to the safety of the
operator.
Important:
Recently trimmed material must
dry a little before being shredded. It increases
the performance of the shredder, providing
better residue composting.
The equipment must be installed in an open,
 
well-ventilated environment on solid, flat
ground.
Keep children and spectators away. People,
 
especially children, must remain at a safe
distance from the working area - 30m - when
the equipment is being used. The operator/
user is responsible for accidents that may
occur.
Do not allow people to touch the machine
 
while being used or transported.
Do not lubricate, clean or adjust movable
 
components while they are moving or when
the machine is being lifted.
When maintaining or adjusting the
 
equipment, do not use your hands in
operations that can be done with specific
tools.
Do neither use bad tools nor use them
 
inadequately (e.g. pliers instead of wrenches,
etc.).
70
Shredder Usage
Before servicing hydraulic lines under
 
pressure, switch their components off,
making sure the line is not under pressure
and the liquid in not hot.
After maintenance or repair, make sure tools,
 
cloths or other materials/objects were not left
inside gaps or guides with movable parts.
When using the equipment, only one person
 
must give instructions and signalize the
direction of loads.
Maximum diameter of branches to be fed
 
must be 10 cm.
Remove weird objects such as metal, glass or
 
stones before turning machine on.
Just remove protection lid when machine
 
comes to a stop.
Turn shredder on and wait for maximum
 
revolution to be reached to insert materials.
TRAPP is not responsible for damages caused
 
due to failure to observe the instructions in
this manual.
Tractor discharge power
indications - TR-600T
Only operate shredder if properly connected
 
to the three connecting points of tractor.
The shredder can be transported by a tractor.
 
However, if the equipment has to be coupled
in the place itself, it must be flat, compacted
soil, of enough dimensions to operate it.
Never lift the machine when tractor
 
discharge power is on.
www.trapp.com.br