Idiomas disponibles
Idiomas disponibles
en
|
Operation
4.1
LED display
Symbol
LED display
Meaning
Green LED
The gas warning device is switched on
flashes once
Yellow LED
Warning (e.g. battery almost empty) or main-
flashes once
tenance mode
Yellow LED lights
Error
up continuously
Red LED (gas
A1 alarm (pre-alarm)
warning device
only) flashes once
at short intervals
Red LED (gas
A2 alarm (main alarm)
warning device
only) flashes twice
at short intervals
Blue LED flashes
Bluetooth
once
Blue LED lights up
Bluetooth
continuously
dows
Yellow and blue
Confirmation, internal battery counter reset
LEDs light up
42
®
is activated
®
is activated and connects to Win-
®
terminal device
Instructions for use
|
Dräger Polytron
4.2
Communication interfaces
®
4.2.1
Bluetooth
interface
After the start sequence, the Bluetooth
activated.
If no connection is established, the gas warning device disables the interface
after 10 minutes (factory setting).
If the connection is to be secured with a pairing PIN, an additional pairing can
be carried out and an individual pairing PIN assigned. The factory setting is the
connection without PIN.
You have to assign an individual pairing PIN for applications requiring
security.
4.2.1.1
Activating the Bluetooth
®
● Activate the Bluetooth
interface with the magnetic pen or via the
®
WirelessHART
network:
● Magnetic pen: Tap the marking (figure A 9).
®
● WirelessHART
: Activated via PolySoft.
✓ The blue LED flashes.
®
4.2.1.2
Pairing via Bluetooth
and connecting for the first time
®
When connecting via Bluetooth
for the first time, you must pair the gas warning
®
device with the Windows
terminal device; during this, both devices exchange
identification data so that they automatically recognize each other the next time
they are connected.
Prerequisite:
®
–
Activate the Bluetooth
interface on the gas warning device and on the
®
Windows
terminal device.
®
● If the Bluetooth
pairing PIN "000000" is used, Bluetooth
place automatically.
®
If an individual Bluetooth
pairing PIN has been assigned, you will be
prompted to enter the PIN.
✓ After successful connection, the blue LED lights up continuously.
The gas warning device and the Windows
are connected.
®
6700 IR WL, Dräger Polytron
®
interface of the gas warning device is
®
interface
®
pairing will take
®
terminal device with PolySoft
®
Repeater WirelessHART
®
