Dräger Polytron Repeater WirelessHART 6700 IR WL Manual Del Usuario página 40

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 97
en
|
Description
Alert icon
Signal word
CAUTION
NOTICE
2.2
Trademarks
Trademark
Trademark owner
Aegex Technologies, LLC
TM
aegex10
EX80
Getac Technology GmbH
Bluetooth SIG, Inc.
®
Bluetooth
FieldComm Group, Inc.
®
WirelessHART
ecom instruments GmbH
®
Pad-Ex
Microsoft Corporation
®
Windows
The following webpage lists the countries in which Dräger's trademarks are
registered: www.draeger.com/trademarks.
3
Description
3.1
Product overview
Illustration on fold-out page:
A 1
Housing cover
A 2
Battery box
A 3
Protective cap (if battery box removed)
40
Consequences in case of nonob-
servance
Indicates a potentially hazardous situa-
tion which, if not avoided, could result in
injury. It may also be used to alert
against unsafe practices.
Indicates a potentially hazardous situa-
tion which, if not avoided, could result in
damage to the product or environment.
Instructions for use
|
Dräger Polytron
A 4
Connector for antenna with cover cap (delivery state)
A 5
Sealing ring
A 6
Housing
A 7
Weather cap
A 8
Trim plate
A 9
®
Marking for Bluetooth
-activation /
magnetic pen operation
A 10
LED display
A 11
Locking screw (Torx T20)
A 12
Arresting cable
A 13
Fastening screw for arresting cable
A 14
Fastening screw forgrounding
3.2
Functional description
®
3.2.1
Dräger Polytron
6700 IR WL
®
The Dräger Polytron
6700 IR WL is a fixed gas warning device with infrared
sensor for monitoring hydrocarbons. The gas warning device includes a
repeater function for forwarding data from other WirelessHART
devices.
The device either uses batteries or a wired power supply.
The gas warning device is integrated into a WirelessHART
system manager, access point and controller. The Dräger REGARD
PLC, for example, are used as controllers. Ranges between access point and
gas detector can be up to 500 m in a free field.
Operation and configuration
The general device status is signaled via the LED display.
The Dräger PolySoft configuration software is used for operation and
configuration. Connection to PolySoft is via the WirelessHART
®
built-in Bluetooth
interface.
®
6700 IR WL, Dräger Polytron
®
network
®
network with
®
7000 or a
®
network or the
®
®
Repeater WirelessHART
loading