Idiomas disponibles
Idiomas disponibles
5. SAFETY DEVICES
Shearing-prevention safety device: Implemented by means of a safety circuit compliant
with European standards; it intervenes by blocking the beater motor when the tank cover is
opened.
Motor overheating safety device: Implemented by means of thermal relays; they protect
machine motors from overloads, by signalling a message on the display, emitting an
intermittent acoustic signal and are restored directly from the push button control panel.
Heat elements safety device: Implemented by means of safety thermostats; they protect
the heat elements from overheating, by signalling a message on the display, emitting an
intermittent acoustic signal and are restored directly from the push button control panel.
Chiller circuit over-pressure safety device: implemented by the approved automatic-
restoration safety pressure switch; it protects the integrity of the chiller circuit from
overpressure.
Protection against short circuit of auxiliary utilities: Implemented by fuses which
intervene on the logic unit or auxiliary power supply in the event of short-circuits.
SELV safety circuit: the push button control panel and the water bath fluid levels are
powered at low voltage by means of an approved dual-insulation safety transformer,
protected against short circuits by fuses.
Water bath fluid level safety device: implemented by a conductivity probe inside the tank
which signals on the display and emits an intermittent acoustic signal if the fluid level is
insufficient.
ENGLISH - 12
