Tabla de contenido
Idiomas disponibles
Idiomas disponibles
O R I G I N A L I N S T R U C T I O N
6. SERVICING THE TOOL
Regular servicing should be carried out and a comprehensive inspection performed annually or every 500,000 cycles,
whichever is sooner.
CAUTION: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals
may weaken the materials used in these parts.
CAUTION: Before maintenance, remove any dangerous substances that may have accumulated due to work processes.
CAUTION: The employer is responsible for ensuring that tool maintenance instructions are given to the appropriate
personnel.
CAUTION: The operator should not be involved in maintenance or repair of the tool unless properly trained.
CAUTION: The tool shall be examined regularly for damage and malfunction.
CAUTION: Read Safety Instructions on page 4 to 6.
6.1 DAILY SERVICING
•
Daily, before use or when first putting the tool into service, pour a few drops of clean, light lubricating oil into the
air inlet of the tool if no lubricator is fitted on air supply. If the tool is in continuous use, the air hose should be
disconnected from the main air supply and the tool lubricated every two to three hours.
•
Check for air leaks. If damaged, hoses and couplings should be replaced by new items.
•
If there is no filter on the pressure regulator, bleed the air line to clear it of accumulated dirt or water before connecting
air hose to tool.
•
Check that the nose assembly is correct.
•
Check the stroke of the tool is adequate to place selected insert. (See stroke adjustment page 9).
•
Inspect the drive screw in the nose assembly for wear or damage. If any, renew.
6.2 WEEKLY SERVICING
*
Check for oil leaks and air leaks on air supply hose and fittings.
6.3 SERVICE KIT
For all servicing we recommend the use of the service kit (part number 74200-99990) supplied in its own plastic case.
Part Number
07900-00618
PUSHER
07900-00619
GUIDE BUSH
07900-00478
Ø 3mm PIN PUNCH
07900-00624
Ø 4mm PIN PUNCH
07900-00157
INTERNAL CIRCLIP PLIERS
07900-00161
EXTERNAL CIRCLIP PLIERS
07900-00625
SOFT MALLET
07900-00623
25mm SOCKET
07900-00006
SPATULA
07900-00434
32mm SPANNER
07900-00621
28mm SPANNER
07900-00637
17mm SPANNER
07900-00643
PUSHER KNOB
SERVICE KIT 74200-99990
Description
QTY
Part Number
1
07900-00393
14mm/15mm SPANNER
1
07900-00409
12mm/13mm SPANNER
1
07900-00626
11mm SPANNER
1
07900-00469
2.5mm ALLEN KEY
1
07900-00351
3mm ALLEN KEY
1
07900-00224
4mm ALLEN KEY
1
07900-00225
5mm ALLEN KEY
1
07900-00620
12mm ALLEN KEY
1
07900-00456
T BAR
1
07992-00075
MOLYKOTE 55M (100 gm TUBE)
1
07900-00627
PLASTIC CASE
1
07900-00632
17mm/19mm SPANNER
1
E N G L I S H
Description
QTY
1
1
1
1
1
1
1
1
1
1
1
1
13
Tabla de contenido
