Tabla de contenido
Fabrication Nº:
Equipment:
OPERATING INSTRUCTIONS AND MAINTENANCE MANUAL
9.6.3
RECIPE screen
On the RECIPE screen you will be able to load the recipes to be prepared and to
create new recipes and/or modify existing recipes.
If you cannot see the names of the configurable parameters properly,
enlarge the fields by pressing and dragging the line thereof.
Recipe parameters
For each recipe, the system will allow you to configure a total of 20 steps. In each
step, you can configure the following parameters:
Message
Minutes
Seconds
Homogenizer operation
SP Homogenizer (rpm)
SP Mixing VCR
Mixing VCR
Temperature Ctrl
SP Temperature
Ctrl Dosification
SP Dosage
Vacuum Pump
SP Fuser Mixer
SP Fuser Temperature
Step Change
Ref. ProJect / Revision:
721021-07 / R01
721021-70-1 / 721021-70-3
VESSEL FOR CREAMS – Mod. VCR 1002 / MELT TANK – Mod. MET 0400
The message to be displayed on screen before the step starts
The minutes the step will last.
The seconds the step will last (maximum value = 59).
Selection of the desired operation.
The rotational speed of the homogeniser during the step.
The rotational speed of the anchor stirrer during the step.
The direction of rotation of the anchor stirrer seen from the
manhole.
Selection of the desired operation.
The desired temperature value for the step (°C).
Selection of the desired product for dosification.
The desired dosing value for the step (kg)
Stop/start of the vacuum unit.
The rotational speed of the anchor stirrer during the step.
The criterion for moving to the next step.
Client:
UNIPHARMA
Date:
11-2015
EN
ES
MDI VCR (v1.0)
53 of 153
Capítulos
Tabla de contenido
