BERTO'S 31876900 Manual De Instrucciones página 127

Tabla de contenido
- We recommend that you use a cooking vessel with a bottom thickness of 2-3 mm if it is made of enameled steel or
4-6 mm if it is made of stainless steel.
- If you use the cooking area as a working area, don't forget to clean it after you have used it; cleaning will prevent the
glass from being scratched by crumbles or other.
- "Cooktops must not be used for resting objects".
- When you move a cooking vessel on the cooking area, lift it up to avoid scratching the surface.
ATTENTION!
If, when hot, the hob is in contact with plastic, foil, sugar or food containing sugar, remove these materials immediately
by using the proper cleaning spatula since these substances can damage the surface if they melt. Before cooking food
containing a large amount of sugar, we recommend cleaning the cooking surface with a suitable product.
-
"ATTENTION: if the surface shows any cracks, immediately disconnect the unit or the damaged part from
the power supply network. "
- "ATTENTION: do not rest plastic containers on hot surfaces. "
IMPORTANT!
Do not pour water on the cooking area when it is still hot since the glass could become damaged or weakened.
Metal objects get hot very fast; therefore, while the unit is operating, don't rest metal objects such as cans, tins,
foil, cutlery, rings, keys, watches, etc. on it.
People with a pacemaker should ask their doctor if they can use an induction cooker.
Do not rest credit cards, phone cards, magnetic strip or other magnetic objects on the glass ceramic cooker.
The induction generator integrates a cooling system.
PAY ATTENTION THAT THE FLOW OF COOLING AIR THROUGH THE PERFORATIONS IN THE BOTTOM AND
BURNER OF THE APPLIANCE IS NOT OBSTRUCTED. THIS MAY CAUSE THE APPLIANCE TO SWITCH OFF DUE TO
OVERHEATING.
Make sure that the input and output air holes are not covered by paper, cloth, or other objects; that can cause
overheating and switch off the induction system.
Do not spill liquids (e.g. water, oil, etc.) into the induction generator.
Do not use a water jet to clean the unit.
Do not touch any parts of the induction generator.
After use, turn off the hob through its control device.
Do not rely on the detector of cookware.
WARNING RELEVANT TO INDUCTION HOBS
| 127
EN
Tabla de contenido
loading

Tabla de contenido