System Address - Sanyo SPWXDR124GH56A Manual Del Usuario

10-26. Automatic Address Setting
10-26-1. Basic wiring diagram
●
Link wiring
GB NOTE
●
A terminal plug (black) is attached to each of the outdoor unit control PCBs. At only 1 outdoor unit, leave the ter-
minal plug short-circuit socket on the "Yes" side. At all the other outdoor units, change the socket (from "Yes" to
"No").
●
A maximum of 8 indoor units can be connected to 1 remote controller for group control.
FR

System address 1

DE
No. 1
IT Outdoor unit
Terminal plate 1, 2
PT
Terminal plate 1, 2
Indoor unit
1-1
GR
Wireless remote
ES
controller
* If wall-mounted type units are used for a simultaneous-operation multi system (group control), refer to 10-16. System Con-
trol (basic wiring diagrams and wiring procedures) when wiring.
DC̲Inverter̲Eng.indd 98 DC̲Inverter̲Eng.indd 98
(Change setting to "1")
No. 2
Inter-unit control
wiring
1-2
1-3
Remote controller crossover
wiring for group control
System address 2
(Change setting to "2")
Change the terminal
plug (black) short-circuit
socket
2-1 2-2
Wired remote
controller
Remote controller crossover
wiring for group control
Fig. 10-25
98
System address 3
(Change setting to "3")
Change the terminal
plug (black) short-circuit
socket
No. 3
Inter-unit control wiring
3-1 3-2 3-3
Wired remote
controller
2007/07/25 13:21:53 2007/07/25 13:21:53