Tabla de contenido
10-8-3. Setting the outdoor unit system addresses
For basic wiring diagram 2 (Set the system addresses: 1, 2, 3...)
Outdoor unit control PCB
System address rotary switch
(Set to "0" at time of shipment)
System address rotary switch
System address
10s
20s
ON
1
2
System address No.
0 Automatic address
(Setting at shipment = "0")
1 (If outdoor unit is No. 1)
2 (If outdoor unit is No. 2)
11 (If outdoor unit is No. 11)
21 (If outdoor unit is No. 21)
30 (If outdoor unit is No. 30)
10-8-4. Automatic address setting using the remote controller
When the outdoor unit shown in "10-8-2. Basic wiring diagram 2" is used for group control of multiple units, use
the remote controller to perform automatic address setting. (During automatic address setting, "SETTING" blinks on
the remote controller display.)
●
Press the remote controller timer time
ger.) Then press the
(Automatic address setting is performed in sequence for all outdoor units from No. 1 to No. 30. When automatic
address setting is completed, the units return to normal stopped status.)
●
To select each refrigerant system individually and perform automatic address setting, press the remote controller
timer time
button and
temperature setting
(Item code "A1" appears: Individual system automatic address setting)
Use either the
(R.C.1 is displayed.) Then press the
1.) When automatic address setting for system 1 is completed, the system returns to normal stopped status.
Again press the remote controller timer time
Then in the same way as above (use the
automatic address setting.
DC̲Inverter̲Eng.indd 73
DC̲Inverter̲Eng.indd 73
3 – 6 HP
MOV
(CN025, WHT)
DIP switch
ON
Fig. 10-7
OFF
System address 10s digit
(2P DIP switch)
Both OFF
Both OFF
Both OFF
10s digit ON
20s digit ON
10s digit and 20s digit ON
button and
button. (Item code "AA" appears: All systems automatic address setting.)
button simultaneously. (Hold for 4 seconds or longer.) Then press either of the
/
buttons.
or
button to select the outdoor unit to perform automatic address setting for.
button. (Automatic address setting is performed for refrigerant system
4 – 6 HP
F101
TD (CN024, BLK)
TO (CN023, BLK)
TS (CN022, RED)
System address 1s place
ON
ON
1
2
OFF
ON
ON
1
2
OFF
ON
ON
1
2
OFF
ON
ON
1
2
OFF
ON
ON
1
2
OFF
ON
ON
1
2
OFF
button simultaneously. (Hold for 4 seconds or lon-
button and the
button simultaneously.
button to display "R.C.2"), select the next system and perform
73
Varistror (VA002)
Varistror (VA001)
Terminal plug (CN015, BLK)
EMG (CN014, BRN)
OC (CN013, BLU)
ROM (CN012, WHT)
IC007
PRY (CN110, YEL)
C2 (CN020, WHT)
C1 (CN021, WHT)
(Rotary switch)
"0" setting
"1" setting
"2" setting
"1" setting
"1" setting
"0" setting
GB
FR
DE
IT
PT
GR
ES
2007/07/25 13:21:49
2007/07/25 13:21:49
Tabla de contenido
