Timberland VR33 Manual De Instrucciones página 3

Recommend:
5.
• When setting the minute hand, first advance it 4
to 5 minutes ahead of the desired time and then
N 1 2 turn it back to the exact minute.
VR33
Push back to
Normal position
• Push the crown back to the normal position.
How to use stopwatch functions
• The stopwatch can measure up to 29'59" in one-second increments.
• When the measurement reaches 30 minutes, the stopwatch automatically stops counting.
* Before using the stopwatch, be sure to check that the crown is set at the normail position and that the
stopwatch hands are reset to the "0" position.
Note: If the stopwatch hands do not return to the "0" position when the stopwatch is reset to "0", follow
the procedure in "Stopwatch hand position adjustment".
• The stopwatch second hand is capable of timing 30 minutes. (60 seconds x 30 times)
• The stopwatch minute hand is capable of timing 30 minutes.
• Whether the stopwatch hands return to the "0" position in a clockwise rotation or in a counterclockwise
rotation is decided depending on the elapsed time the stopwatch has measured.
Stopwatch hand position adjustment
If the stopwatch hands are not in the "0" position, follow the procedures below to set them to the "0"
position.
1.
• Pull the crown out to the 2nd click position.
N 1 2
Note: While the stopwatch is running or has
VR33
been stopped while running, if the crown is
pulled out to the 2nd click position, the
stopwatch will be automatically reset.
Pull out to
2nd position
STOPWATCH
Standard Measurement
minute hand
A A
Start Stop
A
Accumulated Elapsed Time Measurement
VR33
A A
SPLIT
Start Stop Restart
SPLIT RELEASE
B
Note: Restart and stop of the stopwatch can be repeated by
RESET
pressing Button "A."
STOPWATCH
Split Time Measurement
second hand
A B
Start Split
Release
Note: Measurement and release of split time can be repeated
by pressing Button "B."
Measurement of Two Competitors
A B
Start Finish Time
of 1st Competitor
Competitor
Press A.
2. 3.
to move the
A
stopwatch hands
clockwise.
VR33
Press B.
to move the
B
stopwatch hands
counterclockwise.
• Press Button "A" or "B" to set the stopwatch hands • Push the crown back to the normal position.
to the "0" position.
• The movements of the stopwatch minute hand and
stopwatch second hand are interlocked. To set the
stopwatch minute hand to the "0" position, continue
to move the stopwatch second hand until the
stopwatch minute hand reaches the "0" position.
Note: The stopwatch minute and second hand move
quickly if Button "A" or "B" is kept pressed.
B
Reset
A A B
Stop Reset
B A B
Split
Stop Reset
A B B
2nd Finish Time Reset
of 2nd
Finishes Competitor
N 1 2
VR33
Push back to
Normal position