Wooden Steps - BWT myPOOL POOL'N BOX Instrucciones De Montaje

10.2

Wooden steps

In the case of an above-ground configuration, the wooden steps supplied with your POOL'N BOX are
a key safety feature:
• Do not forget to remove it when the pool is not in use
• Apply the warning notice to the wall that reminds users of this necessity, using 4 galvanised torx
countersunk screws 4 × 25 mm (bag K).
The step is comprised of 2 hand rails (1330 × 94 × 35 mm) that feature grooves machined to house the
treads, which are sections of pine coping, 600 × 145 × 28 mm. Assemble the steps according to
using 22 galvanised torx countersunk screws 5 × 60 threaded over 35 mm (bag K):
• 16 screws to fasten the treads to the hand rails;
• 6 screws to fasten to supports to the exterior sides of the ladder hand rails.
The ladder is fastened to the wall using a system of hooks and lever locks that are screwed into position using
8 galvanised torx countersunk screws 4 × 25 mm. The two hooks are screwed into position underneath the
coping using 4 screws, and the two lever locks are fastened to the step supports using a further 4 screws.
36/48
2021/02 - Version: D Code : 37311
Figure 37 – Assembling the wooden access ladder
Figure 38 – Assembly of the hook/ lever lock system
WOODEN POOLS BWT myPOOL POOL'N BOX
Figure 37