Drainage - BWT myPOOL POOL'N BOX Instrucciones De Montaje

5.2.3 Drainage

In the case of an in-ground installation, create a drain around the entire outer periphery of the pool. The
drain, which should have a diameter of 80 cm, should be connected to a relief well located in one of the
corners on the outside edge of the excavation. The relief well should be 0.5 m deeper than the floor of the
excavation and should have a diameter of at least 0.3 m to accommodate a lift pump.
Peripheral drain, diameter 80 mm
WOODEN POOLS
peripheral
drain
Root barrier
or felt
Undisturbed
earth
Figure 1 – Drainage system installation diagram
BWT myPOOL POOL'N BOX
Wooden
frame
Drainage
gravel
Concrete slab
Min depth 150 mm
Waterproofing film
Stone bedding
Geotextile felt
Relief well, diameter 80 mm
2021/02 - Version: D Code : 37311
13/48