Options - LORCH S Pulse XT Manual De Instrucciones

Options

22 Options
Feed variants
Precision 4 roller drive for all working ranges
Standard
Double drive (op-
tional equipment)
Feed rollers top
and bottom with
grooves (Special
equipment)
Tab. 6: Optional 4-roll drive
Weld method upgrades
– SpeedArc-Upgrade Order No. 575.1001.0
– SpeedPulse-Upgrade
– SpeedRoot-Upgrade Order No. 575.1011.0
– SpeedUp-Upgrade Order No. 575.1002.0
– SpeedCold-Upgrade Order No. 575.1013.0
Additional wire feed case A + B/G, A + B/W
‰ For upgrading a compact A installation to an additional
case.
Additional wire feed case B + B/G, B + B/W
‰ For upgrading a compact B installation to an additional
case.
INT jig interface
‰ Interface for connecting to a jig or welding robot.
Push Pull
‰ For controlling a Lorch push-pull torch.
Digital Push Pull
‰ For digital control of Push Pull torches as well as for ma-
chines with additional intermediate drive.
Push Pull torch
‰ With torches having a length in excess of 5 m, we recom-
mend the use of a Push Pull torch. This has an additional
feed motor on the front of the torch, to ensure a continu-
ous feed.
01.21
Standard version with 4 roller wire feed unit. Straighten-
ing effect on the wire reduces friction in the welding
torch. Suitable for thicker or harder wires. Knurled feed
rollers are ideal for filling wires which are difficult to feed.
Wire straightening with double drive. Double drive
means reduced contact pressure i. e. reduced wire defor-
mation. Suitable for thicker and harder wires, or where
longer hose packs are used. Knurled feed rollers are ideal
for filling wires which are difficult to feed.
Feed rollers with double groove (top + bottom). No wire
deformation. Ideal for soft wires (aluminium, bronze,
copper...).
Order No. 575.1010.0
909.2599.9-06
Instrument Set DS - V/A-Meter
‰ Additional voltmeter and ammeter in digital version to
display the actual values of welding current and welding
voltage, located either in the power source or in the wire
feeder.
Suspending device
‰ Device to allow the workshop case to be mounted in a sus-
pended mode.
Intermediate hose assemblies
‰ Extension between the power source and the wire feeder
of 1 – 20 m.
TIG option
‰ For TIG welding with additional TIG torch.
Pole reversal equipment
‰ For changing the polarity of the welding current.
- 67 -