Commissioning; User Interface - LORCH S Pulse XT Manual De Instrucciones

Commissioning

All:
 Tighten the torch and thread the wire electrode in.
The order numbers of the replacement parts
i i
depend upon the type of torch used and the
diameter of the wire, and can be obtained from
the torch spare parts lists.
35 60 61
66
Fig. 16: Wire feed
13 Commissioning
13.1

User Interface

S28
Fig. 17: User interface
S1
"Mode" button
Switching between the available welding processes.
S2
Multifunction display
For displaying all parameter values and messages.
01.21
48
62 63 11 64 65
48
S27 S26
11
Central socket
35
Main plug (torch)
48
Wire feed roller
60
Retaining nipple (=clamp) of the plastic cores for 4.0
mm or 4.7 mm outside diameter
61
O-ring
62
Union nut
63
Plastic core
64
Support tube for plastic cores with 4 mm OD. Support
tube not required with OD of 4.7 mm.
65
Guide tube
66
Wire guide spiral
S5
S2 S4
S1 S3
S22
S25 S24
S23 S21
S3
"Material" button
For selecting the material to be welded. This button
also has a "decrementation" (-) function, for example to
lower the value of a secondary parameter or select the
special programmes.
909.2599.9-06
S8 S11
S7 S10
S6 S9 S12
S20
S19 S17
S13
S14
S16 S15
- 47 -