Graphs - LORCH S Pulse XT Manual De Instrucciones

21

Graphs

I = Current
I1 = Welding current
I2 = Second current
Ie = End current
Is = Start current
G = Gas
t = time
Fig. 22: Current path diagram
1/freq = Twin pulse frequency
I = Current
IΔ = TwinPulse current alteration
t = time
Fig. 23: TwinPulse diagram
- 66 -
t Gv = Gas pre-flow
t Gn = Gas post-flow time
t I = Welding time/spot welding time
t Ia = Downslope
t le = Crater fill time
t ls = Crater fill time
t E1 = High current phase
t E2 = Low current phase
t Eg = Cycle
t E1/t Eg = TwinPulse relation
909.2599.9-06
Graphs
01.21