2- Remove pin A and push the knob to the "Rear unloader" position (fig.28 below). Replace the
pin to latch the knob.
3- Open the side shield C and remove double chain D.
4- Close side shield C.
REAR
UNLOADER
A
B
NOTE: When unloading the Wagon from the rear, without removing the double chain, the work gear
and the decompactor rollers will continue operating normally.
TIP: If you find it difficult to place the knob in the indicated position, quickly turn on and off the tractor
power take-off. The movement of the mechanism will facilitate the adjustment.
18
SIDE
UNLOADER
fig.28
Instruction Manual
fig.29
Remove the double chain:
the helix transporter and the
fig.30
decompactors will stop operating.
fig.31