Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety
- Never try to clean or remove scraps of products when the machine is turned on. Disconnect from
the power take-off and wait until the machine is completely motionless before touching any part of
the machine.
- Keep away from the conveyor belt, decompactor roller and the unloader helix transporter while
operating.
- Never put your hands, feet, or any other part of your body near the moving conveyor belt, rollers, or
helix transporter.
- While unloading, stay outside of the area where the product is being unloaded. Always keep a safe
distance from the machine when it is operating.
- Never touch the chains or gears when the machine is turned on. Keep your hands away from the
moving parts.
- Keep the safety adhesive labels in good condition and legible. Replace them whenever
necessary.
- Keep all the shields and protections in their proper locations and do not operate the machine
without them being installed.
- It is prohibited to stand on the tow hitch, feed mixer, or inside the wagon when it is operating or
transporting a load. Whenever, it is necessary to get on the machine to perform any adjustment,
repair, or manual moving of a store product, disconnect the wagon from the power take-off of the
tractor, remove the ignition key, and wait for all the parts/ components to be motionless.
- Never try to clean or unblock the unloader helix transporter or the conveyor belt when the machine
is turned on. Always turn off the tractor and remove the ignition key before performing any cleaning
or maintenance job on the machine.
- Do not try to remove the safety shields when the machine is turned on.
- Disconnect the power take-off and remove the ignition key from the tractor before stretching the
chains or unloader conveyor belt.
- Moving components, due to inertia, continue moving for some time even after the machine is
turned off. So, before touching any component or part, disconnect the actuation source, look and
listen to see if there is any sign of movement. Only touch the component if you are sure it is
motionless. Always pay close attention!
- If it is necessary to work on the machine when it is hydraulically suspended, it is necessary to place
it on supports for extra safety. Hydraulic mechanisms can slip without warning or due to leakage
and cause an accident. Never brace a machine on cement blocks or hollow bricks or other supports
as they can crush under the prolong effect from the heavy load.
- Examine the location before starting to work. Put markings in dangerous places or where there are
obstacles which can be dangerous to operating the machine.
FORAGE WAGON
7
Tabla de contenido
