Inserting The Bobbin - Texi Joy 13 Manual De Usuario

EN
5.
Stop the machine when it has made a few turns, and cut the thread close to the
hole in the bobbin. Depress the foot control again. When the bobbin is fully
wound, it will stop automatically.
6. Return the bobbin winder to its original position by moving the spindle to the
left, and cut the thread.
7.
Turn the hand wheel to the right position.

INSERTING THE BOBBIN

1.
Place bobbin into bobbin holder with the thread unwinding counter clockwise.
2.
Draw thread into notch.
3. Pull thread toward the left and along the inside of spring until it slips into notch
being sure that thread does not slip out of notch.
4. Pull thread out about 10 cm.
62
Texi Joy 13 instrukcja 2017.indd 62
Texi Joy 13
16/01/17 19:22