Thread Tension For Zigzag Stitch; Pattern Selection - Texi Joy 13 Manual De Usuario

2.
When bobbin thread appears on top side of fabric.
Turn the tension dial to a lower number to loosen the upper thread tension.
3.
When upper thread appears on the bottom side of fabric.
Turn the tension dial to a higher number to tighten the upper thread tension.

THREAD TENSION FOR ZIGZAG STITCH

To sew zigzag stitches, the thread tension should be set
to a slightly weaker tension than when sewing straight
stitches. You will obtain a nicer stitch when upper thread
appears on bottom side of fabric.

PATTERN SELECTION

1. Raise the needle above the fabric and select the desired pattern at the setting
mark by turning the pattern selector dial.
2. 2. To choose your pattern place dial on the correct symbol (A-L) which refers to
pattern table printed on the machine head. Changing stitch width is possible
only for zigzag stitches. It can be changed between E (narrow) and C (wide).
Texi Joy 13 instrukcja 2017.indd 65
Texi Joy 13
EN
65
16/01/17 19:22