Connecting the batteries (ONLITE central eBox MS1200)
– The following battery cables are already connected (condition on delivery):
Location
On recharging device ONLITE central
eBox BCU at terminal BAT.-
On recharging device ONLITE central
eBox BCU at terminal BAT.+
– The medium black battery cables, which are used for connecting the batteries in different battery
compartments, are already installed in the distribution board beneath the battery compartments.
Cable type
Medium black battery cable;
already installed underneath battery
compartment 1
Medium black battery cable;
already installed underneath battery
compartment 2
Medium black battery cable;
already installed underneath battery
compartment 3
14
Cable type
Long black battery cable
Red battery cable
1.
Insert 2 batteries in each battery compartment.
Note
i
·
The battery connections face forward.
·
The positive terminal of the battery shows on the left side, and the
negative terminal on the right side.
·
The remaining 10 batteries are not placed in the battery compartments
until later.
2.
Number the batteries as shown in the figure.
3.
Label the positive terminal of battery 1 with the plus sticker.
4.
Label the negative terminal of battery 18 with the minus sticker.
5.
Connect the red battery cable already connected to the recharging device at
terminal BAT.+ to the positive terminal of battery 1.
6.
Connect the long black battery cable already connected to the recharging
device at terminal BAT.- to the negative terminal of battery 18.
7.
Connect the batteries to each other as follows:
Note
i
The positive terminal of the battery cable is labelled with a red heat-
shrinkable sleeve and the negative terminal with a black heat-shrinkable
sleeve.
From
Negative terminal of battery 5
Negative terminal of battery 10
Negative terminal of battery 14
To
Positive terminal of battery 6
Positive terminal of battery 11
Positive terminal of battery 15
ONLITE central eBox, Quick commissioning 3.0 | 03.2019 | en
Length (mm)
1310
360