Osprey Medical Smart Monitor Instrucciones De Uso página 3

Settings App Overview
Optional: Enable WiFi
Enabling WiFi allows the system to automatically download Osprey Medical DyeVert app, iOS
updates (including cybrsecurity) as they become available. It also allows case log data to be
uploaded for analysis to assist in software development and complaint handling. All data on the
Smart Monitor are encrypted with AES-256 while at rest on the Smart Monitor. Transport layer
security (TLS) is used to encrypt the data during transfer to Amazon Web Service (AWS), and
AES-256 encryption secures the data at rest on AWS. For additional information contact Osprey
Medical.
To enable WiFi

Open iOS settings app

Select WiFi

Select WiFi network

Enter WiFi network password

Exit system settings and return to desktop
Optional: Monitor Date & Time Settings
For automatic date and time settings to work, Wifi and Location Services must be enabled. Once
the Location Services setting is enabled, it cannot be disabled but the settings under Location
Services can be individually enabled and disabled.

Open iOS settings app

Select Privacy

Select Location Services

Enable Location Services

Select General

Select Date & Time

Enable Set Automatically

Exit system settings and return to desktop
All commands that are native to iOS and accessible via standard iOS iPad commands are visible
to the user; however, not all commands will be accessible due to the limitation of the Osprey
Medical software and MDM Profile.
Contrast Montoring App Use
Select Contrast Monitoring app by touching the DyeVert Plus icon.
APP HOME SCREEN
The default Main Menu will appear and depicts the setup for a DyeVert Plus EZ Disposable Kit.
For a depiction of the DyeVert Plus Disposable Kit setup select the arrow or finger swipe the
screen. If using the DyeTect Contrast Monitoring Disposable Kit, the Smart Monitor will
automatically recognize the disposables upon selection of "New Case".
Instruction Videos
a.
1)
To view a instructional video for setup and priming either the DyeVert Plus Disposable
Kit or DyeVert Plus EZ Disposable Kit, select "Setup".
2)
Select DyeVert type (DyeVert Plus or DyeVert Plus EZ).
3) Select manifold type
The appropriate video will automatically start using a built-in iOS media player with standard
video controls. The media player will automatically close once the video is complete. The video
may be exited at any time using the exit button in the top left corner.
Settings
b.
1)
From Main Menu, select Settings This is only necessary if changes to the default User
Settings are desired. Access to Osprey Settings is intended to occur by an Osprey
Medical representative only.
2)
Select User Settings
SETTINGS SCREEN
To configure User Settings select applicable parameter:
3)
Select Warning Tones to enable tones on for Threshold Warning, Threshold Exceeded
Warning and Battery Level Warnings. Select "Tone Alerts" or "Voice Alerts"
4)
If Tone Alerts enabled, Select Tone Selection to specify type of tones desired
5)
Threshold Warning % (applicable only when a Physican-Specified Threshold is entered)
specifies the percentage of the entered threshold volume reached during the case that
will trigger the warning to the user e.g. a threshold of 100mL is entered and a 66%
Threshold Warning is selected. The Display would warn the user when 66mL (66% of
100mL) is reached. Default is 66% of the Physican-Specified Threshold volume.
6)
Select Pause Voice Alert to diable or enable. When enabled, will provide a voice alert
each time the system has been paused to contrast accounting and when the system is
resumed (becomes active) to contrast accounting.
7)
Select Start in Pause Mode, to disable or enable. When enabled, allows the user to start
the case in Pause Mode. The user must manually unpause the system to begin contrast
accounting by pressing the Pause Button on the module or by aspirating contrast into the
Smart Syringe.
8)
Select Pause Lock, to disable or enable. When enabled, the system bypasses all
pause/resume logic in the software. The system will only pause and resume when
initiated by the user by pressing the Pause Button on the DyeVert Plus Module / DyeVert
Plus EZ Module / DyeTect Module or the corresponding soft touch key on the Display.
9)
Select Case ID and Renal Function, to disable or enable. When enabled, the user may
enter a case identifier, estimated Glomerular Filtration Rate (eGFR), Serum Creatinine
(SCr) & units (mg/dL or mol/L) and/or Creatinine Clearance (CrCl).
10)
Case History allows the user to view case summary information
USER SETTINGS
8280-B