Maintenance And Cleaning; Cleaning Products; General Information - Arneg Alba Guía De Instalación Y Manejo

21. Maintenance and cleaning

DANGER! Live parts. Electrocution.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
DO NOT wet, spray water or clean directly the electrical parts of the cabinet (fans, inte-
rior lighting, electrical cables etc.)
DO NOT touch the counter with wet or damp hands or feet
ATTENTION! Cold surfaces. Injuries, burning. Glass breakage.
Wait for the glass parts to reach room temperature.
DO NOT use hot water on the cold glass surfaces.
Protect the hands with work gloves
i
The products will deteriorate due to germs and bacteria.
Compliance with Hygiene Standards and the cold chain is indispensable to guarantee the
protection of consumer health
The cleaning operations must include:
Step Name
1 Washing
Sanitation
2
3 Rinsing
4 Drying

21. 1 Cleaning products

Use
- clean water at maximum temperature of 30°C
- soft cloth
- mild and neutral detergents
Do not use - detergents or similar products to clean the parts in methacrylate (Plexiglass)
- in powder
alcohol-based
- with granules
- either acidic or alkaline (bleach, ammonia)
- concentrates
- with unknown chemical composition
- abrasive products, chemical/organic solvents
- abrasive sponges, scourers, sharp tools
- aggressive solvents (acetic acid, citric acid etc.)

21. 2 General information

• The surfaces to be cleaned and the detergents and water used for cleaning must not exceed a
maximum temperature of 30°C.
• Dry the surfaces with a soft cloth
05060188 00 10-02-2020
Mechanical roughing, removal of approximately 97% of the dirt
Elimination of bacteria and harmful substances
Description
Alba-Bucarest
English
45