Cleaning Of The Outer Parts (Daily / Weekly); Clean The Internal Parts (Monthly); Clean Specific Materials - Arneg Alba Guía De Instalación Y Manejo

Alba-Bucarest
English
ATTENTION!
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO NOT aim the jet directly at the varnished or plasticised surfaces
DO NOT apply the detergents directly onto the surfaces to be cleaned
DO NOT use steam cleaning equipment
Do not use excessive force
DO NOT bring the jet too close to the dirt. This may cause injury to the operator and con-
taminate parts that have already been cleaned, as well as the environment.
avoid detergents from coming into contact with nearby products.
ATTENTION!
Floor products. Vapours. Corrosion. Breathing difficulty.
Avoid contact, inhaling.

21. 3 Cleaning of the outer parts (Daily / Weekly)

Clean all external parts of the cabinet every week. See "General instructions" chapter21. 2.

21. 4 Clean the internal parts (Monthly)

Refer to chapters 21. 1 and 21. 2 and proceed as follows:
Step
remove all foodstuff from the counter and put it in a suitable place to maintain the storage
1
temperature
2 remove all the removable parts, such as display dishes, grid trays, etc.
3 wash with lukewarm water (max 30°C)
4 clean with an antibacterial detergent
carefully clean the bottom tank, the drip, and the grid that protects the water drain, elimi-
5
nating all foreign bodies that have fallen through the suction grid lifting the sheet of the fans
6 carefully dry using a soft cloth
i
Should you notice ice built up, call a specialized technician.

21. 5 Clean specific materials

Material
Glass • use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
• immediately remove all traces of
water and detergent with a dry
cloth in order to prevent marks
from forming and to prevent liquid
from reaching the gaskets, frame,
or the glass door hinges.
• use a cloth soaked in neutral deter-
Plastic
gent
(door seal
• clean with a cloth soaked in clean
profiles)
water
Aluminium • use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
• immediately remove all traces of water
or detergent using a dry cloth in order
to prevent marks from forming
46
Remedy
Action
What to avoid
DO NOT use hot water on cold glass surfaces;
the glass could crack and injure the operator
DO NOT use rough or abrasive materials or
metal scrapers that could scratch the glass
surfaces
DO NOT use dirty cloths
DO NOT use waxes, concentrated detergents,
which contain oil, bleach, glass cleaners, abra-
sive detergents or flammable fluids.
DO NOT use acid or alkaline detergents (e.g.
bleach) which could corrode the surfaces
DO NOT use rough or abrasive materials or
metal scrapers that scratch the aluminium
surfaces
DO NOT use steam cleaning equipment
DO NOT use dirty cloths
05060188 00 10-02-2020