Maintenance And Cleaning; Cleaning Products; General Information - Arneg Ankara 4P Guía De Instalación Y Manejo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 97

23. Maintenance and cleaning

DANGER! Live parts. Electrocuti on.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
DO NOT wet, spray water or detergent directly onto the electrical parts of the cabinet
(fans, interior lighti ng, electrical cables etc.)
DO NOT touch the cabinet with wet or damp hands or feet
CAUTION! Cold surfaces. Injuries, burning. Glass breakage.
Wait for the glass parts to reach room temperature.
DO NOT use hot water on the cold glass surfaces.
Protect the hands with work gloves
i
The products will deteriorate due to germs and bacteria.
Compliance with Hygiene Standards and the cold chain is indispensable to guarantee the
protecti on of consumer health
The cleaning operati ons must include:
Step
Name
1
Washing
Saniti zati on
2
3
Rinsing
4
Drying

23.1 Cleaning products

Use
- clean water at maximum temperature of 30°C
- soft cloth
- mild and neutral detergents
Do not use
- detergents or similar products to clean the parts in methacrylate (Plexiglass)
- in powder
alcohol-based
- with granules
- either acidic or alkaline (bleach, ammonia)
- concentrates
- with unknown chemical compositi on
- abrasive products, chemical/organic solvents
- abrasive sponges, scourers, sharp tools
- aggressive solvents (aceti c acid, citric acid etc.)
23.2 General informati on
• The surfaces to be cleaned and the detergents and water used for cleaning must not exceed a
maximum temperature of 30°C.
• Dry the surfaces with a soft cloth
05060215 00 05-2022
mechanical roughing, removal of approximately 97% of the dirt
cleaning+disinfecti on:
- detergents: eliminati on of visible dirt
- disinfectants: removal of pathogenic micro-organisms that remain
aft er washing
Ankara 4P - Arka 4P
Descripti on
English
45
Tabla de contenido
loading

Este manual también es adecuado para:

Arka 4p

Tabla de contenido