Spare Parts; Troubleshooting - Arneg Alba Guía De Instalación Y Manejo

Conditions Italy: unless otherwise agreed, the machines are guaranteed only if factory
new, for one year from the date of shipment, except for the electrical and re-
lated parts. Within this period, the parts will be replaced or repaired for free
at the discretion of our technicians that will assess it they are defective. For
further details on warranty conditions please check the sales terms.
Overseas: see the agreements with the respective dealers or area managers.
i
Failure to comply with the instructions in this manual shall void the warranty.

25. Spare parts

Use only original spare parts
• replace the parts before wearing excessively to avoid damage to persons or property
• carry out scheduled maintenance as provided in the agreement

26. Troubleshooting

Problem
The cabinet
• power black-out
stops and
• master switch turned off
does not
• plug detached
restart
• breakers triggered (fuses,
thermal breakers/differential
switches)
• electric controller faulty
i
The cabinet
• the cabinet is in defrosting
phase
does not cool
• air inlets are obstructed
sufficiently
• the load is not distributed even-
ly
• the cabinet is next to air cur-
rents or heat sources
• the cabinet is not levelled
The engine is • screws and bolts are not tight-
noisy ened
• the cabinet is not levelled
Condensate
• poor room conditions
• poor air ventilation
• the window heaters do not work • check electrical connections
• the windows are not closed
properly
05060188 00 10-02-2020
Possible causes
once the electrical supply has been restored, check that all the electrical
equipment in the store will restart without triggering the overload protec-
tion devices; otherwise, modify the system to differentiate the start-up of
the various devices
If power is not restored in a short time, store the goods in a cold room to
maintain the storage temperature.
Possible solutions
• check the cause of the black-out
• turn on the switch
• insert the plug
• check the temperature of the condensing
unit
• replace the controller
• wait for defrosting to complete (about 30min)
• release air inlets
• load the goods in an orderly fashion (Fig.14)
• check the position of the cabinet inside the
store chap.12
• level the cabinet see chap.12
• tighten the bolts and screws
• level the cabinet chap.12
• check the position of the cabinet inside the
store chap.12
• check the operation of fans and wiring
• check the operation of heating elements
• close the windows properly
Alba-Bucarest
English
49