Preliminary Information; Correct Use Of The Automatic Sliding Door; General Safety Warnings; Ce Marking And European Directives - myone LUCE R Manual De Instalación Y Mantenimiento

1

Preliminary information

Dear Client, thank you for choosing us. You are reminded to read the following installation and use instructions of the automation carefully, to obtain the best
performance. We also remind you that assembly of this product must only be carried out by professionals.
Before starting installation or activating an automatic wicket, an inspection must be carried out on site by professionally competent staff, to takes the measures
of the wall compartment, the fixture and the automation.
This inspection is necessary to assess the risks and to choose and apply the most appropriate solutions based on the type of pedestrian traffic (heavy, limited,
one-directional, two-directional, etc.), the type of users (elderly, disabled, children, etc.) and the presence of potential hazards or particular local situations.
To facilitate the installation technician in applying the European Standard EN 16005 on safe use of automatic wickets, you are advised to consult the UNAC
(Association of manufacturers of motorised fixtures and controls for doors and windows in general) guides available on the website: /ass/unac.

1.1 CORRECT USE OF THE AUTOMATIC SLIDING DOOR

The LUCE R automations for automatic sliding doors were designed and manufactured in compliance with European Standard EN 16005. Furthermore, the innova-
tive and evolutionary electronic control system makes use of the door intrinsically safe, since the maximum forces developed are limited to non-hazardous values.
It his however necessary to comply with the following warnings to guarantee safety in relation to its intended use, i.e. pedestrian transit of people.

1.2 GENERAL SAFETY WARNINGS

This assembly, installation and maintenance manual is exclusively for professionally competent staff. Read the instructions carefully before starting to install
the product.
Wrong installation can be a source of danger. The packaging materials (plastic, polystyrene, etc.) should not be disposed of in the environment and must not be
left within children's reach since they are potential sources of danger.
Before starting installation, check the product is intact. Do not install the product in an explosive environment and atmosphere: the presence of flammable gas
or fumes poses a serious danger for health.
Before installing the automation, make all the structural changes relating to implementation of precautions for safety and protection or segregation of all the
crushing, shearing, transfer and danger zones in general.
Check the existing structure has the necessary robustness and stability requirements. MYONE S.r.l. cannot be held responsible for any non-compliance with
good practice in the construction of fixtures to automate, as well as deformations which occur during use. The safety devices (presence sensors, photocells,
etc.) must be installed while taking into consideration: the standards and directives in force, good practice techniques, the installation environment, the operating
logic of the system and the forces developed by the automatic wicket.
Apply the signs planned by the standards in force to identify the danger zones.
Each installation must have visible indication of the identification data of the automatic wicket gate.

1.3 CE MARKING AND EUROPEAN DIRECTIVES

MYONE automations for wicket sliding doors are designed and built in compliance with the safety requirements of the European standard EN
16005 and are equipped with CE marking in compliance with the Electromagnetic Compatibility Directive (2014/30/EU).
MYONE automations are equipped with a Declaration of Incorporation for the Machinery Directive (2006/42/EC).
Pursuant to the Machinery Directive (2006/42/EC) the installation technician implementing the automatic wicket has the same obligations as the manufacturer
of the machine and, as such, must:
- prepare the technical file which must contain the documents indicated in Annex V of the Machinery Directive;
(The technical file must be kept and maintained available to the competent national authorities for at least ten years starting from the date of automatic wicket
manufacture);
- draft the CE Declaration of Conformity according to Annex ll-A of the Machinery Directive and deliver it to the client;
- affix the CE marking on the automatic wicket pursuant to point 1.7.3 of Annex l of the Machinery Directive.

1.4 USE RESTRICTIONS AND RESIDUAL RISKS

The European standard EN 16005 clearly defines which are the main hazards and the necessary protection to make use of the automatic sliding door safe in
standard conditions. Despite this, particular situations may arise where you must assess the possible risks and implement the relevant solutions for protection
to reduce the risk.
For example, the particular installations can be generated by: architectural requirements, the type of use, the use environment, the spaces in the building, the
type of users, etc.
The installation technician is responsible for identifying and assessing these risks and communicating to the owner the solutions implemented, including the
existence of residual risks or the need to restrict use, compiling the following table.
Ref. Residual risk
The data outlined in this manual were drafted and checked with utmost attention.
However, MYONE S.r.l. cannot be held in any way liable for possible errors, omissions or approximations due to technical or graphical requirements.
MYONE S.r.l. reserves the right to make changes to improve products. For this reason, the illustrations and information that appear in this document should
be considered non-binding.
This edition of the manual deletes and replaces previous ones. If changes are made, a new edition will be issued.
4
Solution implemented