Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1 - G1
Input terminal for general use.
Using the ADV menu > STG1, you can associate the G1 terminal with a specific function.
1 - G2
Input terminal for general use.
Output terminal (12 Vdc, 20mA max) for general use.
0 - G2
Using the ADV menu > STG2, you can associate the G2 terminal with a specific function.
1 - S1
N.C. contact of the limit switch of the locking device.
1 - 29
Reset N.O. contact. Closure and release of the contact starts the automatic detection manoeuvre of the stop measurements.
0 - 1 - H - L
Bus connection to functions selector
SD
Standard input for SD micro memory cards. Allows saving the settings of the door and loading the firmware upgrades.
Terminals
Description
R1 - R0
Current input for the opening sensor for emergency exits side A, internal side automation view (remove the jumper and resistance of
the terminals).
1 - EO
N.C. contact of emergency opening. Opening of the contact causes the door to open (connect the emergency opening device
and remove the jumper 1 - EO.
Buttons
Description
OPEN
Door opening button.
↑
Button for menu scrolling and increase values selected.
↓
Button for menu scrolling and reduce values selected.
ENTER
Button for menu scrolling and saving the data selected.
ESC
Menu exit button.
12
Capítulos
Tabla de contenido
