Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14
Routine maintenance plan for automatic sliding doors
To guarantee correct operation and safe use of the automatic door, as outlined in the European standard EN16005, the owner must have professionally
competent staff carry out routine maintenance.
Except for routine cleaning activities of the fixture and possibly the sliding guides on the floor, the competence of the owner, all the maintenance and repair
activities must be carried out by professionally competent staff.
The following table lists the activities relating to routine maintenance, and the intervention frequency referring to the automatic sliding door with operation
in standard conditions. In the event of more burdensome conditions, or in the event of sporadic use of the automatic sliding door, the frequency of the
maintenance intervention can be coherently adequate.
Activity
Disconnect the power supply and open the automation and execute the
following checks and adjustments.
- Check correct fastening of all the screws on the components inside the
automation.
- Check cleaning of the carriages and the sliding guide.
- Check correct voltage of the belt.
- Check the wear status of the belt and the wheels of the carriages (if neces-
sary, proceed to replace them).
- Check correct fastening of the doors on the carriages.
- If present, check the lock coupling and operation of the unlocking cord.
Connect the mains power supply and execute the following checks and
adjustments.
- Check correct operation of the command and safety devices.
- Check the detection area of the safety sensors complies with the provi-
sions of the European standard EN16005.
- If present, check the locking device is working correctly.
- Check the battery-powered device is working properly (if necessary, proce-
ed to replace the battery).
All maintenance, replacement, repair, upgrading, etc. operations must be written on the maintenance register, as requested by the European standard
EN16005, and delivered to the owner of the automatic sliding door.
For possible repair or replacement of products, original spare parts must be used.
14.1 DISPOSAL OF PRODUCTS
USER INFORMATION
Pursuant to Legislative Decree No. 49 on 14 March 2014
"Implementation of Directive 2012/19/EU on electrical and electronic equipment waste (WEEE)"
The crossed bin symbol outlined on the equipment indicates the product at the end of its useful life must be collected separately from other waste.
The user should therefore give the equipment with essential components intact at the end of its useful life to suitable electronic and electro-technical
differentiated waste centres, or deliver it to the dealer on purchase of new, equivalent type equipment, in the region of one to one, or 1 to zero for equi-
pment with its longest side under 25cm. Adequate differentiated collection for subsequent sending of the decommissioned equipment for recycling,
processing and compatible environmental disposal contributes to avoiding negative effects on the environment and health and promotes recycling
of the components of the equipment. Illegal disposal of the product by the user will be prosecuted pursuant to the administrative sanctions of Leg.
Decree No. 49 on 14 March 2014.
26
Frequency
Every 6 months or every 500,000 manoeuvres.
Every 6 months or every 500,000 manoeuvres.
N.B. Check the safety functions of the automation and the safety devices
which must be carried out at least once a year.
Capítulos
Tabla de contenido
