Electronic Control Adjustment; Main Adjustments Menu - myone LUCE R Manual De Instalación Y Mantenimiento

11

Electronic control adjustment

The electronic control is equipped with 4 buttons and 4 alphanumerical displays to set all the necessary adjustments.
On switching on the electronic control, the display indicates the word "MENU". Operation of the 4 keys is indicated in the table.
Buttons Description
ENTER Selection button, each time it is pressed you enter the selected parameter.
Saving button, pressing for 1 second you "SAVE" the selected value.
The following Menus are present:
MENU = Main parameters menu
ADV = Advanced parameters menu
SEL = Functions selector menu
MEM = Memory management menu
INFO = Information and diagnostics menu
ESC Escape button, each time it is pressed you exit the selected parameter or from the menu.
Scroll button, each time it is pressed, you select a menu item or increase the value of the
h
selected item.
Scroll button, each time it is pressed, you select a menu item or reduce the value of the
i
selected item

11.1 MAIN ADJUSTMENTS MENU

Using the buttons ↑ and ↓ choose MENU, press ENTER to select and adjust the main parameters.
Display Description
DOOR Automation type setting. Choose from the following values:
DOOR TYPE
SL5A = standard automation
SL5B = BIG automation for very heavy doors
OPEN
Opening direction setting. Choose from the following values:
OPENING
↔ → = door with 2 leaves or door with 1 leaf that opens to the right
DIRECTION
← = door with 1 leaf that opens to the left
EMERGENCY - For Emergency automations with one leaf and left opening, the carriage must be fastened to
the upper part of the belt, as indicated in chapter 10.1.
PART Partial opening percentage setting. Choose between the minimum and maximum value:
PARTIAL
minimum value = 10%
OPENING
maximum value = 90%
EMERGENCY - For Emergency automations, partial opening must comply with legislation in force.
VOP
Opening speed setting. Choose between the minimum and maximum value:
OPENING
minimum value = 100 mm/s
SPEED
maximum value = 800 mm/s
EMERGENCY - For Emergency automations, set the opening speed ≥ 300 (for doors with 2 leaves), or ≥ 550
(for doors with 1 leaf).
For Heavy automations and Big automations (DOOR=SL5B), the speed is automatically reduced to the permit-
ted values (see the technical data).
VCL
Closing speed setting. Choose between the minimum and maximum value:
CLOSING
minimum value = 100 mm/s
SPEED
maximum value = 800 mm/s
For Heavy automations (DOOR=SL5H) and Big automations (DOOR=SL5B), the speed is automatically redu-
ced to the permitted values (see the technical data).
TAC Open door time setting. Choose between the minimum and maximum value:
CLOSING
NO = door always open
TIME
minimum value = 1 s
maximum value = 30 s
PUSH
Force setting Choose between the minimum and maximum value:
MOTOR
minimum value = 1
POWER
maximum value = 10
LEAF Leaf weight and friction present setting. Choose from the following values:
DOOR
NO = very light leaf / no friction
WEIGHT
MIN = light leaf / little friction
MED = medium leaf / normal friction
MAX = heavy leaf / high friction
HEAVY = HEAVY automation for very heavy doors
Default settings
SL5A
↔ →
90
500
300
1
10
MED
17