Tabla de contenido
Idiomas disponibles
Idiomas disponibles
13
Routine maintenance plan for automatic leaf door
The following table lists the activities relating to ordinary maintenance, and the intervention frequency referring to the automatic leaf door with operation in
standard conditions. In the event of more burdensome conditions, or in the event of sporadic use of the automatic leaf door, the frequency of the maintenance
intervention can be coherently adequate.
Activity
Disconnect the power supply and open the automation and execute the
following checks and adjustments.
- Check correct fastening of all the screws on the components inside the
automation.
- Check correct voltage of the belt.
Connect the mains power supply and execute the following checks and
adjustments.
- Check correct operation of the command and safety devices.
- Check the detection area of the safety sensors complies with the provi-
sions of the European standard EN16005.
- If present, check the locking device is working correctly.
- Check the battery-powered device is working properly (if necessary, proce-
ed to replace the battery).
All maintenance, replacement, repair, upgrading, etc. operations must be written on the maintenance register, as requested by the European standard
EN16005, and delivered to the owner of the automatic leaf door.
For possible repair or replacement of products, original spare parts must be used.
13.1 DISPOSAL OF PRODUCTS
INFORMATION FOR USERS
Pursuant to Legislative Decree No.49 on 14 March 2014
"Implementation of Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)"
The crossed bar symbol on the equipment indicates the product at the end of its useful life must be collected separately from other waste.
The user should therefore hand over the equipment will its components at the end of its useful life to suitable electronic and electro-technical
differentiated waste collection centres, or send it back to the dealer on purchasing new, equivalent equipment, exchanging one for another, or
1 to zero for equipment with its longest side less than 25 cm. Adequate differentiated waste for subsequent sending of the decommissioned
equipment for recycling, treatment or disposal which is environmentally friendly contributes to avoiding possible negative effects on the
environment and health and encourages recycling of materials composing the equipment. Illegal disposal of the product by the user will be
prosecuted according to administrative sanctions pursuant to Leg. Decree no.49 on 14 March 2014.
26
Frequency
Every 6 months or every 500,000 manoeuvres.
Every 6 months or every 500,000 manoeuvres.
N.B. Check the safety functions of the automation and the safety devices
which must be carried out at least once a year.
Capítulos
Tabla de contenido
