Operation Manual (Removable - Nice M3BAR Instrucciones Y Uso

Before using the automation for the first time, ask the installer to explain the origin of residual risks and devote a few minutes to
reading this user instruction and warning manual given to you by the installer . Keep the manual for reference when in doubt and
pass it on to new owners of the automation .
IMPORTANT! – Your automation is a machine that performs your commands faithfully; negligent or improper use may
constitute a hazard:
– Never activate automation controls if persons, animals or objects are present in the operating range.
– Never touch parts of the automation while the pole is moving!
– Transit is only permitted if the pole is completely open and stationary!
Warnings
1 - Children: An automation system guarantees a high level of safety,
using its detection systems to prevent movement in the presence of
persons or objects, and ensuring constantly foreseeable and safe ac-
tivation . Nonetheless, it is advisable to ensure that children do not play
in the vicinity of the automation . This is not a toy!
2 - This product is not designed to be used by persons (including chil-
dren) whose physical, sensorial or mental capacities are reduced, or
with lack of experience or skill, unless suitable instructions regarding
use of the product have been provided by a person responsible for
safety or under supervision of the latter .
3 - Malfunctions: if the automation is seen to perform abnormally,
disconnect the electrical power supply from the system and manually
release the gearmotor . Never attempt to perform repairs; contact your
local installer for assistance . In the meantime the system can be used
as a manual access point, after releasing the gearmotor as described
be low in this document . In the event of breakage or a power fail-
ure, while waiting for the installer or the electrical power supply to re-
turn, if the buffer battery is not fitted, the automation can still be used .
Manually release the gearmotor (see step 9 - Gearmotor manual re-
leasing and locking) and move the pole manually as required .
4 - Safety devices disabled: the barrier can be operated even when
the safety device on the barrier does not work correctly:
- Activate the barrier command (with the transmitter or key-operat-
ed selector switch, etc .); if all is in working order, the pole opens or
closes normally; otherwise the flashing light emits a number of flash-
es and the manoeuvre is not started (the number of flashes depends
on the reason for which the manoeuvre does not start) .
- In this case, the user must press and hold the command within three
seconds .
- After approx . 2 seconds the barrier will start to operate in "hold-to-
run" mode, i .e . the pole will continue to move while the command is
activated; THE POLE STOPS AS SOON AS THE COMMAND IS RE-
LEASED .
If the safety devices are out of service, the automation must be
repaired as soon as possible.
5 - Even if you possess the skills, never modify the system or program-
ming and setting parameters of the automation: this is the responsibil-
ity of the installer .
6 - Testing, periodic maintenance and any repairs must be document-
ed by the person performing the operations and the relevant docu-
ments must be kept by the system owner . The only operations that
can be performed by the user periodically are to clean the photocell
lenses and the automation . To prevent anyone from activating the bar-
rier, release the automation system before proceeding with the opera-
tions (as described below) . Use a slightly damp cloth to clean .
7 - Disposal: At the end of the automation's lifetime, ensure that it is
disposed by qualified personnel and that the materials are recycled or
scrapped according to current local standards .
8 - Gearmotor manual release and locking: The gearmotor is
equipped with a mechanical system that enables manual opening and
Operation manual
(to be given to the final user)
closing of the pole . These operations are required in the event of a
power failure or malfunctions .
IMPORTANT! – The gearmotor release and locking operations
must be performed only when the pole is horizontal and sta-
tionary.
To manually lock and release the barrier, insert the key supplied and
turn it by 180° (fig. A); the key can be turned to the left or to the right .
A
English – 23