Service Mode - Tecno-gaz alia B Instrucciones De Uso

▬
Press the central button to enable/disable the information messages
The menu allows the activation of the feeding system by the osmosis device (optional).
When the system is activated the charging pump is disabled. The cycles carried out
since the last filters replacement are also shown. The counter cannot be reset when
filters are replaced. See chapter 14 for further details.
After the printer installation (optional accessory), is possible to print the traceability
adhesive labels to be stuck on the wrap before starting sterilization is entered.
▲
▬
Press the central button to move to the next selection
▲
Access to the service menu (after password entry). This mode is reserved exclusively for
the setup by an authorised personal. The manufacturer shall not be held responsible
for any tampering with or injury to unauthorised staff.
VOCAL MESSAGES
Press the arrow to move to the next item
OSMOSIS CONTROL
EXTERNAL PRINTER
00
▼
00
▼

SERVICE MODE

When the box flashes press the arrows to
select the number of labels to be printed.
When the box flashes press the arrows to
select the number of months before expiry.
Press the central button for the last time to
display the final selection page.
ENGLISH
23