Account Management; Service Mode - Tecno-gaz ONYX B 7.0 Manual Tecnico

ENGLISH
Scroll to the item SERVICE MODE.
Access by pressing the central button and enter the password to access the technical
menu.
0.0.0.0.
0.0.0.0.
v
Press to confirm the password and access the technical menu.
▬
Press to restart the procedure.
x
Press to cancel the selections and go back to the setup menu
This mode is reserved exclusively for settings made by an authorized
technician. The manufacturer is not liable for tampering or injuries to
any unauthorised personnel.
It allows you to manage the autoclave users.
It gives the possibility to display, create or delete a certain
In the Account Management menu it is also possible to
activate or disable (on/off) the load control at the end of
the cycle; in the event that the control is active, validation
will be requested at the end of each cycle.
00

SERVICE MODE

ACCOUNT MANAGEMENT

user.
Create new user: press the central button
on "NEW USER" to create the new user.
ENTER NAME: When the box flashes,
press the arrows to scroll the characters up
to the desired username, confirming each
box with the button
ENTER PASSWORD: select the desired
password with a similar procedure to
ENTER NAME.
Press the arrow to go to the next item
(see beginning of chapter 08)
When the box flashes, press the arrows to
select the desired value.
Press the central button again to go through the
boxes and press the arrows to select the value.
Continue in this manner up to the last value.
Press the central button for again to display the
selections below.
39
▬