Service Mode - Tecno-gaz europa B pro Instrucciones De Uso

ENGLISH
After the printer installation (optional accessory), is possible to print the traceability
adhesive labels to be stuck on the wrap before starting sterilization is entered.
▲
▬
▲
• OSMOSIS SYSTEM : Activate / Disconnect with the button
system with osmosis device (
pump is disconnected.
• CYCLES FROM THE CHANGE OF THE FILTER: Cycles from the last change of
filters are visualized.
• RESET THE COUNTER: It allows you to reset the counter when you replace the
filters
.
Access to the service menu (after password entry). This mode is reserved exclusively for
the setup by an authorised personal. The manufacturer shall not be held responsible
for any tampering with or injury to unauthorised staff.
16
EXTERNAL PRINTER
00
▼
Press the central button to move to the next selection
00
▼
Press the arrow to move to the next item
OSMOSIS CONTROL
optional

SERVICE MODE

When the box flashes press the arrows to
select the number of labels to be printed.
When the box flashes press the arrows to
select the number of months before expiry.
Press the central button for the last time to
display the final selection page.
). When the system is activated the charge
▬
the supply