Unit Types And Year Of Manufacture; Manufacturer And Service Addresses; Intellectual Property Rights; Proper Use - DENTSPLY Multimat Easy Manual De Instrucciones

1 General
‹ Device type and year of manufacture
Multimat Easy
®
Year of manufacture: 2008

‹ Manufacturer and service addresses

DeguDent GmbH
Rodenbacher Chaussee 4
63457 Hanau
Germany
Phone +49 180 23 24 555
Fax +49 180 23 24 556

‹ Intellectual property rights

© 2004 DeguDent GmbH
All rights pertaining to these Instructions for Use, including
but not limited to photocopying and dissemination as well
as translation, are reserved for DeguDent GmbH. Specifi-
cally, these Instructions for Use must not, whether in who-
le or in part, be reproduced in any form (print, photocopy,
microfilm or other technologies) and/or stored, processed,
copied or disseminated using electronic data storage
and retrieval systems without prior written approval by
DeguDent GmbH.
Violations of these rights will be prosecuted and will make
the guilty party liable for damages. All intellectual property,
trademark, service mark and other rights are reserved by
DeguDent GmbH.
38
MultimatEasy

‹ Proper use

The Multimat Easy is a device for firing dental ceramic
®
materials. Observe the alloy and ceramic manufacturers'
directions and recommendations.
Any use outside or beyond these directions or specifications
does not constitute proper use. Any damage resulting
from such use will be the sole responsibility of the user of
the Multimat Easy. The same applies for any unauthorized
®
changes to the unit. Proper use presupposes compliance
with all notes on
• Safety
• Operation
• Care, maintenance and troubleshooting
described in these Instructions for Use. The unit is inten-
ded solely for dental laboratory use. Any use in other loca-
tions or for other purposes requires prior written approval
of DeguDent GmbH.