Pre-Defined Programs; Special Programs - DENTSPLY Multimat Easy Manual De Instrucciones

10 Pre-defined programs
Note: The parameters listed here have the nature of
recommendations. If necessary, conduct your own test
fi rings and adapt the parameters to your own needs. Note
that the cooling stages must be defi ned as per the alloy
manufacturers' recommendations.
Base temperature, pre-heating temperature, tempering
temperature: in °C, Pre-drying, drying, pre-heating time,
holding time, vacuum time, tempering time: in mm:ss,
Heating rate: in °C/min, Vacuum: in hPa, Cooling stage:
indicated by an asterisk (*)
Ceramco3
93 Paste opaque
94 Powder opaque
95
Shoulder
Opaque dentine,
96
dentine, effects,
enamel
Glaze firing
97
without glaze
Glaze firing
98
with glaze
Correction,
99
Add-on

Special programs

91
Heating program
92 Cleaning program
60
MultimatEasy
500 100 975
650 70 970
650 70 965
650 45 930
650 45 920
650 55 925
650 55 920
450 55 980
575 55 1200
05:00 03:00 50
03:00 03:00 50
05:00 05:00 50
05:00 05:00 50
03:00 03:00 0
03:00 03:00 0
05:00 05:00 50
03:00 02:00 50
03:00 02:00 50
00:01 00:01 –
00:01 00:01 –
00:01 00:01 –
00:01 01:00 –
00:00 00:30 –
00:00 00:30 –
00:01 00:01 –
05:00 05:00 –
09:00 10:00 –