DENTSPLY Multimat Easy Manual De Instrucciones página 51

Here you can determine whether the vacuum pump will
run in standby mode (see "Entering standby mode").
Standby Vacuum
[on/off]
Here you can switch between °C and °F as a temperature
unit.
°C / °Fahrenheit
[°C/°F]
Here you can turn the beep signals on or off. If the beep
signal is turned on, you get:
A short tone each time a key is pressed; a long tone for
each invalid entry; three tones at the end of a program.
Acoustic signal
[on/off]
Indicates the operating hours for the muffle.
Hours muffle:XX:YY
Indicates the operating hours for the vacuum
pump.
Hours pump:XX:YY
Indicates the total operating hours for the
Multimat Easy.
®
Hours furnace:XX:YY
Controls 5
51
MultimatEasy